www.joyetv.com

Filter element of fiber laser cutting machine  

87

Filter element of fiber laser cutting machine

Filter element material: 1. The end cover of the anti-corrosion filter element is injection molded with nylon reinforcing layer, which is quickly pasted on the filter element with formic alcohol resin. 2. The NBR seal ring is very sealed and resistant to high temperature up to 120 °. 3. The stainless steel frame is perforated cylindrical design, the strength is far greater than that of electroplated steel, and the two-way pressure resistance is 7 bar. 4. The particle pre filter layer is wound on both sides of the filter material to ensure the particle filtration and increase the strength of the filter material. 5. The borosilicate fiber filter material is resistant to high temperature and chemical corrosion, and has a high void ratio to ensure efficient filtration and minimum pressure loss. 6. Polyester fiber liquid collecting layer, this material can "catch" the small oil drop formed by the filter layer, and make it quickly settle to the lower part of the filter to avoid flowi…