www.joyetv.com

corrosion resistance alumina ceramic rings flanges pulley  

96

corrosion resistance alumina ceramic rings flanges pulley

corrosion resistance alumina ceramic rings flanges pulley Reputation depends on quality,  quality comes from Hard! Alumina Ceramic: Alumina wear-resistant ceramic dry pressing technology is limited to objects with a simple shape and an inner wall thickness of more than 1 mm and a length to diameter ratio of not more than 4:1. The forming method is uniaxial or bidirectional. The press is available in hydraulic or mechanical form and can be semi-automatic or fully automatic. The maximum pressure of the press is 200Mpa. The output can reach 15 to 50 pieces per minute. Since the hydraulic press has a uniform stroke pressure, the height of the pressed parts is different when there is a difference in the filling of the powder. However, the pressure applied by the mechanical press varies depending on how much the powder is filled, which may cause a difference in dimensional shrinkage after sintering, which affects product quality. properties:…